300TE speaker upgrade – Part 2 – fronts

In a previous article I had been undertaking a 300TE speaker upgrade. I started with the rears which were very simple. Next was the fronts. As I outlined in the first part, the W124 uses an odd size and mounting system for the front speakers. They are 12cm and use these clips on the side rather than the normal mounting ears. I guess this system was used in a few European cars of the era, as there are still a couple of manufacturers who offer speakers like these.

I went with the Crunch DSX120, in a kit for the […]

300TE speaker upgrade – Part 1 – rears

I wasn’t very happy with the sound from my 300TE. The front passengers speaker rattled badly and the sound wasn’t the best. As I’m taking the car on a road trip in January, I wanted better sound. I’ve already put the Becker 1402 back in, so all I needed was some decent speakers.

In researching what was possible, options were not extensive for the S124. The front speakers are both an unusual size (12cm) and an unusual mounting system. The rears are are a more common 10cm size, but mounted in the door handles. I personally don’t think much of […]

W126 rear speakers

I had previously replaced the front speakers in my 1987 560SEC. Now it was time to look at the rears. As I outlined in the article about the front speakers, I am replacing the W126 rear speakers with Crunch 16.5cm speakers. These speakers should fit into the factory brackets and underneath the factory grilles.

Changing the rears in the second generation W126 is a bit more of a fiddly job. For starters the factory grilles are now very brittle. Not only are they over 35 years old, but the Australian sun is not kind to plastics. It is quite common […]

W126 front speakers

I’m taking my 560SEC on a long road trip in a couple of weeks. I’ve never really been especially happy with the sound from the speakers, particularly from midrange tones. Before I took the car on a long trip, I wanted to upgrade the speakers.

I am also doing a similar project on my 300TE. On that car, one of the front speakers is damaged and makes a rattling sound. The W124 speakers are harder to find than for the W126. The front speakers on a W124 use an odd mounting system, and the rears have minimal clearance. There […]

450SLC Becker Mexico Cassette install part 2 – Upgrading the speakers

I am currently upgrading the radio in my 1977 Mercedes 450SLC. It currently has a Pioneer MP3/CD Player I had installed not long after I purchased the car in 2003. The Pioneer came out of my old 300E and was installed in early 2002. As well as the Pioneer CD player, the car also had Pioneer speakers. These pre-dated my ownership of the car. Looking them up online, they appeared to be late 90s vintage, and were sold as drop in speakers for Chrysler models. They had connectors I had not seen before, which must be the Chrysler connectors.

[…]

Citroen DS radio upgrade almost complete

The Radio upgrade on the Citroen DS is almost complete. It’s taken over a month (albeit only a few hours a week). Today I properly installed the speakers. The DS front speaker is a 3″x7″ size which is not very common. Der Franzose carry a drop in replacement, but it is an original paper style speaker and I wanted to go with something more modern. Retrosound offer a low profile 3.5″ speaker, so I went with two of them and used a custom bracket to mount them under the factory grill. For the rears, I went with the retrosound 6.5″ […]